Table of Contents
Advertisement
• For the best performance, connect your computer to the projector using a VGA or HDMI cable for
display and the USB cable for interactivity.
• If you are using a computer, try setting your computer's display to 1280 × 800.
• If you are using USB Display in Windows, you may need to disable Windows Aero in the Epson USB
Display Settings program on your computer.
• If you are having difficulty double-clicking in OS X, go to the System Preferences menu, select
Mouse or Trackpad, and reduce the Double-Click Speed.
• If you are projecting over a network, see the EasyMP Network Projection Operation Guide for
performance adjustment instructions.
Parent topic:
Solutions When the Interactive Pens Cause Interference or Unwanted Effects
If the pens are causing interference or unwanted effects, try the following solutions:
• When two pens are used at the same time, make sure they are approximately 4 inches (10.16 cm)
apart.
• Do not rest the pens on the image area of an interactive table, to avoid interference with your
computer's mouse.
• Make sure that nothing is blocking the direct line to the infrared site.
Parent topic:
Solving Network Problems
Check the solutions in these sections if you have problems using the projector on a network.
Solutions When Network Alert E-Mails are Not Received
Solutions When You Cannot Access the Projector Through the Web
Parent topic:
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
Solving Interactive Problems
Solving Interactive Problems
Solving Problems
195
Advertisement
Table of Contents
