Solutions When The Interactive Pens Are Slow Or Difficult To Use; Solutions When The Interactive Pens Cause Interference Or Unwanted Effects - Epson BrightLink 436Wi Manual

Related tasks
Calibrating Automatically
Calibrating Manually

Solutions When the Interactive Pens Are Slow or Difficult to Use

If the pens are difficult to use or respond too slowly, try the following solutions:
• For easier operation, hold the pen perpendicular to the projection surface.
• For the best performance, connect your computer to the projector using a VGA or HDMI cable for
display and the USB cable for interactivity.
• If you are using USB display in Windows, you may need to disable Windows Aero in the Epson USB
Display Settings program on your computer.
• If you are projecting over a network, refer to the EasyMP Network Projection Operation Guide for
performance adjustment instructions.
Parent topic:
Related tasks
Connecting to a Computer for VGA Video
Connecting to a Computer for HDMI Video and Audio
Calibrating Automatically
Calibrating Manually

Solutions When the Interactive Pens Cause Interference or Unwanted Effects

If the pens are causing interference or unwanted effects, try the following solutions:
• When both pens are used at the same time, make sure they are approximately 4 inches (10.16 cm)
apart.
• Turn off the pens when they are not in use.
• Do not rest the pens on the image area of an interactive table, to avoid interference with your
computer's mouse.
• Try changing the Number of Pen Users from one to two.
• Do not press on the pen tips when away from the board; accidentally pressing on the pen tips may
cause the pens to write.
• Make sure that nothing is blocking the direct line to the infrared site.
Parent topic:
Solving Interactive Problems
Solving Interactive Problems
199