Solutions When The Interactive Pen Position Is Not Accurate; Solutions When The Interactive Pens Are Slow Or Difficult To Use - Epson BrightLink 536Wi User Manual

• Press the Pen Mode button on the remote control to toggle between PC Interactive and PC Free
Annotation modes.
Parent topic:
Related concepts
Pen Calibration
Related references
Projector Setup Settings - Extended Menu

Solutions When the Interactive Pen Position Is Not Accurate

If the pen position is not the same as the mouse pointer, try the following solutions:
• Make sure you have calibrated the system. Try manual calibration.
• Try adjusting the pen operation area.
• If you use the E-Zoom + button on the remote control to enlarge the image, the pen position is not
accurate. When you return the image to the original size, the position should be correct.
• In PC Interactive mode (in the Extended menu), turn off Auto Adjust Pen Area and select Manual
Adj. Pen Area.
• Try changing the computer's resolution to 1280 × 800.
• Select Reset All from the Reset menu to restore the projector settings to their default values.
Parent topic:
Related concepts
Pen Calibration
Related references
Projector Reset Options - Reset Menu
Projector Setup Settings - Extended Menu
Related tasks
Adjusting the Pen Operation Area

Solutions When the Interactive Pens Are Slow or Difficult to Use

If the pens are difficult to use or respond too slowly, try the following solutions:
• For easier operation, hold the pen perpendicular to the projection surface.
Solving Interactive Problems
Solving Interactive Problems
194