Solutions When The Interactive Pens Are Slow Or Difficult To Use; Solutions When The Interactive Pens Cause Interference Or Unwanted Effects - Epson 1410Wi User Manual

Solutions When the Interactive Pens Are Slow or Difficult to Use

If the pens are difficult to use or respond too slowly, try the following solutions:
• For easier operation, hold the pen perpendicular to the projection surface.
• For the best performance, connect your computer to the projector using a VGA, HDMI, or DisplayPort
cable for display and the USB cable for interactivity.
• If you are using a computer, try setting your computer's display to 1280 × 800.
• If you are using USB display in Windows, you may need to disable Windows Aero in the Epson USB
Display Settings program on your computer.
• If you are projecting over a network, refer to the EasyMP Network Projection Operation Guide for
performance adjustment instructions.
Parent topic:
Related concepts
Network Interactivity
Related tasks
Using the Pens

Solutions When the Interactive Pens Cause Interference or Unwanted Effects

If the pens are causing interference or unwanted effects, try the following solutions:
• When both pens are used at the same time, make sure they are approximately 4 inches (10.16 cm)
apart.
• Turn off the pens when they are not in use.
• Do not rest the pens on the image area of an interactive table, to avoid interference with your
computer's mouse.
• Try changing the Number of Pen Users setting from One User to Two Users.
• Turn off hovering.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Solving Interactive Problems
Solving Interactive Problems
232