Pen Calibration - Epson BrightLink 536Wi User Manual

• To use the pen as a mouse in PC Interactive mode, select the
• To left-click, tap the board with the pen tip.
• To double-click, tap twice.
• To right-click, press the board with the pen for about 3 seconds.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
Note: If you do not want to use the hovering feature, you can turn it off using the Easy Interactive
Function setting in the projector's Extended menu.
Parent topic:

Pen Calibration

Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate
the first time you use your projector's interactive features. Calibration results remain until you calibrate
again.
If you notice positioning discrepancies after doing any of the following, calibrate again:
• Performing Keystone correction
• Using the Quick Corner feature
• Adjusting the image size
• Moving the projector
Note: Move any pen you are not using away from the projection screen while calibrating.
Using the Interactive Pens
icon and do the following:
119