Turning Bluetooth Visibility Off; Pairing With Pin Authentication; Comparing Authentication Pin When Receiving A Pairing Request - Motorola ASTRO APX 6000XE Series User Manual



Turning Bluetooth Visibility Off

Procedure:
With the Visibility turns On,
1 < >
or to BT. Press the Menu Select button directly below
BT to access the Bluetooth feature screen.
2 U D
or to Visibility and press the Menu Select button
directly below Off.
3
The display shows Visibility Off.
OR
When the timer expires, the status changes to Visibility off
failed. Repeat step 2.
4
Press the Menu Select button directly below Exit to return
to the Home screen.
OR
1
Press the preprogrammed button to disable the Bluetooth
visibility.
2
You hear a short, medium-pitched tone. The display shows
momentary Visibility Off. Visibility mode is disabled.
OR
When the timer expires, the status changes to Visibility off
failed. Repeat step 1.
124
English


Pairing with PIN Authentication

For the security of your radio, Bluetooth Pairing PIN feature is
designed to enable your radio to verify the correct device to pair
before initiating the pairing. Authentic PIN is used for the
verification.
Note: The compare PIN authentication method only
applicable for Bluetooth version 2.1 and above.

Comparing Authentication PIN When Receiving a
Pairing Request
Note: If the device or profile does not support this feature, the
radio prompts BT profiles not supported as your
radio only supports HSP, DUN, PAN and SPP.
Procedure:
1
The radio display shows <Device Friendly Name> pair
request.
2
Press the Menu Select button below Ok to accept.
OR
Press the Menu Select button below Cncl to reject. The
display shows Cancel pairing in progress... followed by
<Device Friendly Name> pair canceled and return to
Home screen.
OR
When the pairing timer expires, the display shows <Device