Searching And Pairing The Bluetooth Device; Turning On Bluetooth Visibility - Motorola APX 8000XE User Manual

MN002667A01-AR
Chapter 6: Advanced Features
Once the device is discovered, your radio automatically pairs with the device.
6.19.4.1

Searching and Pairing the Bluetooth Device

Prerequisites:Ensure the Bluetooth on your device is turned on and is set to Discoverable in order to
enable your radio to detect your device in Bluetooth.
When and where to use:Bluetooth Search in Bluetooth Standard Pairing method is used to scan for
other Bluetooth devices nearby. It is set to turn off by default.
The radio only search for HSP devices and Motorola Solutions MCW & OCW accessories. Radio filters
out other profiles.
Procedure:
Press the preprogrammed Bluetooth Inquiry On/Off button, to enable the Bluetooth Search
feature.
One of the following scenarios occurs:
• If successful, the display shows SRCH ON followed by SRCH END when the radio is pairing
with a device found. The display shows <Device Name> PAIRED to indicate pairing is
complete.
• If the feature fails to initiate or the radio fails to pair with any device, the display shows SRCH
END when the search timer expires without pairing with any device. Repeat this step.
One of the following scenarios occurs:
• The radio continues to connect to the device. If the connecting process is successful, the radio
sounds an incremental-pitched tone. The display shows <Device Type>CONNCTED, and the
Bluetooth icon turns from b to a.
• If the device already has pairing records and the connecting process fails, the radio sounds a short,
low-pitched tone. The display shows <Device Type> CON FAIL.
• If the connection fails within 6 seconds, you hear a decremental-pitched tone to indicate that the
device is unpaired. The display shows <Device Type> UNPAIRED.
6.19.4.2

Turning On Bluetooth Visibility

When and where to use:Turning Bluetooth visibility on enables other Bluetooth devices to search for
your radio. The visibility of the Bluetooth is set to turn off by default.
Procedure:
• a. Press and hold the preprogrammed Bluetooth Inquiry On/ Off button for three seconds to
enable the Bluetooth visibility feature.
One of the following scenarios occurs:
• Keep holding the button although you hear a short, medium-pitched tone with the display
shows momentary VISIBLE. This indicates the visibility is turned on successfully.
• If the visibility fails to turn on, the display shows VISIBLTYFAILED.
• When the timer expires, the display shows VISI OFF.
1
Releasing the preprogrammed button turns off the Visibility mode.
62
1