Exiting Man Down Feature; Re-Initiating Man Down; Testing The Man Down Feature - Motorola ASTRO APX 6000XE Series User Manual

•
To a channel with Emergency but no Man Down feature
The alert tone is inhibited.
•
To a channel with Emergency and different Man Down
configuration – The current alert tone is inhibited and
replaced with a different alert tone.
•
To a channel with Emergency and similar Man Down
configuration – The alert tone continues.


Exiting Man Down Feature

If you are not in a real Man Down situation, you should exit the
Man Down feature and prevent emergency from going off with
the following operation.
Procedure:
Repositioning the radio or shaking the radio (when motion
sensitivity is enabled).
OR
Press the preprogrammed Man Down Clear button to exit.
OR
Press the Menu Select Button below Clr to exit.


Re-Initiating Man Down

After exiting the Emergency Operation when the radio is still in
Man Down condition (tilted achieving threshold angle or
motionless), user must first exit Man Down condition to then re-
initiate the Man Down feature.
76
English
Procedure:
–
Return the radio to the vertical position
OR
Shake the radio (when motion sensitivity is enabled).


Testing the Man Down Feature

Note: Enable the Emergency feature with Silent Alarm
disabled, but not in Surveillance Mode before running
this test on the radio.
Procedure:
When Man Down is enabled on the radio:
1
Turn the radio on and place in the vertical position, for at
least 5 seconds.
2
Lay the radio down in the horizontal position.
3
Wait for alert tone.
4
The radio alerts with audible tone and displays Man-Down.
OR
If no tone is heard, make sure that the Man Down feature is
enabled on your radio. If Man Down feature was not
enabled, please enable it and go through steps 1,2 and 3
again.
OR
If the Man Down feature is enabled and no tone is heard,
send the radio to a qualified technician.