Adjusting The Volume Of The Radio From Bluetooth Audio Device; Viewing And Clearing The Bluetooth Device Information - Motorola ASTRO APX 6000XE Series User Manual

Motorola astro apx 6000xe series two-way radios
Hide thumbs Also See for ASTRO APX 6000XE Series:
Table of Contents

Advertisement

Adjusting the Volume of the Radio from Bluetooth
Audio Device
Your radio can only control the volume of MCW and OCW
Bluetooth enabled audio device. If the radio is paired with other
Bluetooth enabled audio device, its volume is independent from
the APX radio. In this case, the volume is only adjustable on the
device.
Procedure:
With the Bluetooth audio device connected to the radio:
1
Adjust volume up/down on the Bluetooth audio device.
2
The radio display shows Volume XX, and you hear a short,
medium-pitched tone.
Viewing and Clearing the Bluetooth Device
Information
Procedure:
1
<
>
or
to BT. Press the Menu Select button directly below
BT to access the Bluetooth feature screen.
128
English
2
U
D
or
to Devices, once you toggle the highlight to
Devices the display shows XX connected alternates with
XX paired. Press the Menu Select button directly below
Sel to see the details.
3
The display shows No devices if there are no active
Bluetooth devices being paired or connected.
OR
If there are devices being paired or connected,
along the <Device Friendly Name> to see the status of
each device.
OR
Press the Menu Select button directly below Back to return
to the previous screen.
4
U
D
or
to the required device, press the Menu Select
button directly below Clr.
5
The display shows <Device Friendly Name> clear?.
6
Press the Menu Select button directly below Yes to
proceed.
OR
Press the Menu Select button directly below No to return to
previous screen.
7
The display shows <Device Friendly Name> cleared to
indicate clearing is successful.
OR
You hear the radio sounds a short, low-pitched tone. The
U
D
or

Advertisement

Table of Contents
loading

Table of Contents