Pre-Alert Timer; Post-Alert Timer - Motorola ASTRO APX 6000XE Series User Manual

Motorola astro apx 6000xe series two-way radios
Hide thumbs Also See for ASTRO APX 6000XE Series:
Table of Contents

Advertisement

Pressing a preprogrammed Clear button or pressing a Menu
Select button preprogrammed for Clear stops and resets the
timers. The timers do not restart until the radio is
repositioned.
Note:
Emergency must be set up for this feature to operate.
For details on operating the Emergency alerts, please
see Emergency Operation on page 66.
If the radio is preprogrammed to horizontal only, it
must be worn in a vertical position otherwise the Man
Down alert may be inadvertently triggered.
When the radio is programmed with Man Down feature,
special care is required when charging the radio with a
wall mounted charger. See Handling Your Radio on
page 155 for details.
74
English

Pre-Alert Timer

This timer sets the amount of time that a Man Down condition
must be present before the radio-user is warned of the Man
Down condition.
When the radio detects that it has returned to the vertical
position or when the radio detects motion, the Pre-Alert timer
stops and is reset.
The Pre-Alert timer reinitiates when the radio detects it is in the
horizontal position or motionless again.

Post-Alert Timer

This timer sets the amount of time the radio needs to remain in
the Man Down condition before the Emergency alarm is
transmitted. When the Post-Alert Timer is initiated, the radio
alerts the user with an audible tone and displays the "Man-
Down" text.
See Exiting Man Down Feature on page 76 to exit Man Down
feature.

Advertisement

Table of Contents
loading

Table of Contents