Turning On Bluetooth Visibility; Receiving Pairing Request From Other Devices; Turning On The Bluetooth Audio - Motorola APX 8000XE 1 User Manual

English

Turning On Bluetooth Visibility

Turning Bluetooth visibility on enables other Bluetooth
devices to search for your radio. The visibility of the
Bluetooth is set to turn off by default.
• a. Press and hold the preprogrammed Bluetooth
Inquiry On/ Off button for three seconds to
enable the Bluetooth visibility feature.
One of the following scenarios occurs:
• Keep holding the button although you hear a
short, medium-pitched tone with the display
shows momentary VISIBLE. This indicates the
visibility is turned on successfully.
• If the visibility fails to turn on, the display
shows VISIBLTYFAILED.
• When the timer expires, the display shows
VISI OFF.
2
Releasing the preprogrammed button turns off the Visibility mode.
90
Receiving Pairing Request from other
Devices
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and pair
with any request received from other device.

Turning On the Bluetooth Audio

• Turning on the Bluetooth audio using the
preprogrammed button:
2
a. Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the radio
to the headset.
You hear a short, medium-pitched tone. The
display shows HDSET ON.
BT audio routing can be configured in CPS to route
the audio to RSM or radio's internal speaker. The
audio routes to the radio's speaker if RSM is not
connected. Check with your dealer or system