Side Windows; Opening And Closing - Mercedes-Benz E-Class Coupe Operator's Manual

WARNING
G
While closing the side windows, body parts in
the closing area could become trapped. There
is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If somebody
becomes trapped, release the switch or press
the switch to open the side window again.
G WARNING
If children operate the side windows they
could become trapped, particularly if they are
left unsupervised. There is a risk of injury.
Activate the override feature for the rear side
windows. When leaving the vehicle, always
take the SmartKey with you and lock the vehi-
cle. Never leave children unsupervised in the
vehicle.
Side window reversing feature
The side windows are equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts a side window during the
closing process, the side window opens again
automatically. However, the automatic
reversing feature is only an aid and does not
relieve you of the responsibility of paying
attention when closing a side window.
G WARNING
The reversing feature does not react:
to soft, light and thin objects, e.g. small fin-
R
gers
over the last 1/6 in(4 mm) of the closing
R
movement
during resetting
R
when closing the side window again man-
R
ually immediately after automatic reversing
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side win-
dows
The switches for all side windows are located
on the driver's door. There is also a switch on
the front-passenger door as well as on the
doors in the rear compartment on the left and
right-hand sides for the respective side win-
dow.
The switches on the driver's door take prec-
edence.
Front left
:
Front right
;
Rear right
=
Rear left
?
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
To open manually: press and hold the cor-
X
responding switch.
To open fully: press the switch beyond the
X
point of resistance and release it.
Automatic operation is started.
To close manually: pull and hold the cor-
X
responding switch.
To close fully: pull the corresponding
X
switch beyond the pressure point.
Automatic operation is started.
To interrupt automatic operation:
X
press/pull the corresponding switch again.

Side windows

Z
95