Removing A Wheel - Mercedes-Benz E-Class Coupe Operator's Manual

Jacking points (example: Coupe)
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
Vehicles with AMG equipment: to protect
the vehicle body, the vehicle has covers next
to the jacking points on the outer sills.
Vehicles with AMG equipment: fold
X
cover ; upwards.
Position jack ? at jacking point =.
X
Changing a wheel
Example
Make sure the foot of the jack is directly
X
beneath the jacking point.
Turn crank A clockwise until jack ? sits
X
completely on jacking point = and the
base of the jack lies evenly on the ground.
Turn crank A until the tire is raised a max-
X
imum of 1.2 in (3 cm) from the ground.

Removing a wheel

! Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
Unscrew the uppermost wheel bolt com-
X
pletely.
Screw alignment bolt : into the thread
X
instead of the wheel bolt.
Unscrew the remaining wheel bolts fully.
X
Remove the wheel.
X
361
Z