Vertical roof top installation
Fitting the connecting chamber
Turn T-slot bolt 90° for all installation steps.
1. Position the connecting chamber
onto the mounting rails and click
into the retaining plates.
2. Align the connecting chamber.
Note
The tube holders on the mounting
rail must be in line with those in the
connecting chamber; where neces-
sary, align with a piece of string.
16
(cont.)
3. Tighten the mounting rails with the
clamping bolts.
4. Where several collectors are
installed side-by-side, continue
with "Installing the connecting
chamber" on page 25, otherwise
continue with "Fitting the connec-
tion set" on page 26.