Vertical roof top installation
Fitting roof hooks for plain tile cover
Fitting the mounting rails
Turn T-slot bolt 90° for all installation steps.
(cont.)
1. Mark the position of each roof hook
in accordance with the dimensions
shown in the illustration on
page 10.
2. Remove tiles from the roof in the
hook areas.
3. Hook the roof hooks onto the bat-
tens and position and align on top
of the tile below.
4. Secure the roof hooks to the bat-
tens.
5. Cover the roof; trim tiles to suit with
an angle grinder; trim approx.
30 mm off the tiles.
13