Skoda Octavia 1997 Workshop Manual page 78

24
item 17 in 24-1 page 7
16 - 3-pin plug connection
for the engine speed sender -G28- grey
17 - Knock sensor 1 -G61-
18 - Fuel pressure regulator
19 - Camshaft position sensor -G40 -
inspect Chapter 28-1
For engines with engine code AZJ
1 - Activated charcoal filter sole-
*/**
noid valve -N80-
Activated charcoal filter
2.0 l/85 kW Engine, Me-
chanical Components;
Rep. Gr. 20
2 - Return-flow line
secure with spring strap clip
3 - Feed line
secure with spring strap clip
4 - Camshaft position sensor
*
-G40-
5 - Valve for variable intake man-
ifold changeover -N156-
6 - Top part of intake manifold
disassembling and assem-
bling 24-1 page 10
7 - Bottom part of intake mani-
fold
disassembling and assem-
bling 24-1 page 8
8 - 81-pin plug connection
insert and remove plug when
the ignition is switched off
unlock for removing
9 - Engine control unit -J220-
below the water box cover
10 - 40-pin plug connection
insert and remove plug when
the ignition is switched off
unlock for removing
11 - Throttle valve control unit
*
-J338 -
12 - Combination valve
Secondary air pump
13 - Relay carrier
the secondary air pump relay -J299- and the Motronic current supply relay -J271- is also located here
14 - Sender for coolant temperature -G62-
resistances Fig. 1 in 24-1 page 10
with coolant temperature gauge sensor -G2-
before removing, reduce pressure in cooling system if necessary
15 - Air mass meter -G70-
16 - Air filter
24-1 4
page
OCTAVIA 1997
*
*
*
2.0 l/85 kW Engine, Mechanical Components; Rep. Gr. 26
*
*
with intake air temperature sender -G42-
Repairing the injection system
2,0 l/85 kW Engine, Fuel Injection and Ignition System
*
Edition 01.04
S00.5128.53.20