Rules Of Cleanliness; Individual Components Of System - Installation Overview - Skoda Octavia 1997 Workshop Manual

24
If test and measuring devices are required during test
drives observe the following:
Always secure the test and measuring devices on the
rear seat and have a second person operate them
there.
If the test and measuring devices are operated from
the passenger seat the passenger could be injured by
the release of the passenger airbag in the event of an
accident.
If the engine must be operated at start speed without the
engine starting:
–
Unplug 4-pin connector -1- from ignition transformer
-2-.
–
Remove fuse 28 for the fuel delivery unit.

Rules of cleanliness

Pay careful attention to the following five rules for clean-
liness when working on the fuel supply or fuel injection
system:
Thoroughly clean the connection points and their sur-
roundings before releasing.
Place removed parts on a clean surface and cover. Do
not use fuzzy cloths!
Carefully cover or close opened components if the re-
pair is not completed immediately.
Only install clean parts: Remove spare parts from
their wrapping immediately before fitting. Do not use
any parts which have been stored unwrapped (e.g. in
tool boxes etc.).
When the system is open: Avoid using compressed
air. Avoid moving the vehicle.
Individual components of system - In-
stallation overview
For engines with engine identification characters
AEG, APK, AQY, AZH
24-1 2
page
OCTAVIA 1997 2,0 l/85 kW Engine, Fuel Injection and Ignition System
Repairing the injection system
8
12
5 9
13
1 3 6
10 14
2 4 7
15
11
24 31 38
25 32 39
26 33 40
27 34 41
28 35 42
29 36 43
30 37 44
16 20
17 21
18 22
19 23
S97-0319
Edition 01.04
S00.5128.53.20