Imaging Problems (For Digital Only); Imaging Problems (For Analog Only) - Eizo FlexScan EV2316W User Manual

5-3. Imaging problems (for digital only)

Problem
1. The monitor configuration is changed to
single under the multiple monitor configu-
ration (when DisplayPort is connected).

5-4. Imaging problems (for analog only)

Problem
1. Display position is incorrect.
2. Vertical bars appear on the screen or a
part of the image is flickering.
3. Whole screen is flickering or blurring.
Possible cause and remedy
• WhentwomonitorsareconnectedtoonePCusing
DisplayPort,andthepowertooneofthemonitorsis
turnedoffwiththepowerbutton,thescreensettingmay
bechangedtothesinglemonitorconfiguration.Insucha
case,enablethe"DPHotPlug"functionwiththefollowing
procedures.Enablingthisfunctionmayincreasethe
powerconsumption.
1. Press toturnoffthemonitor.
2. Holddown whilepressing toturnonthemonitor.
Eachtimetheoperationenables/disablesthisfunction
alternatively.
Thecurrentsettingstatuscanbeidentifiedbasedonthe
colorusedtodisplaytheinputportorsignalerror.
Setting Input port
Disable
(default
setting)
Enable
Possible cause and remedy
• Use"Position"intheSettingmenutocorrecttheimage
position(see"Tocorrectthescreenposition"(page27)).
• Iftheproblempersists,usethegraphicsboard'sutilityif
availabletochangethedisplayposition.
• Use"Clock"intheSettingmenutoadjustit(see"To
eliminateverticalbars"(page26)).
• Use"Phase"intheSettingmenutoadjustit(see"To
removeflickeringorblurring"(page27)).
Signal Error
Chapter5Troubleshooting
43