Eizo FlexScan EV2316W User Manual page 26

2.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" in the Setting menu, and press
3. Choose "Analog Adjustment" in the "Screen" menu, and press
4. Choose "Auto Screen Adjust" in the "Analog Adjustment" menu, and press
5. Select "Yes" with
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperformingtheautoadjustment,performadjustments
accordingtothefollowingprocedure.Ifthescreenisdisplayedcorrectly,goto"4.Adjustingcolorgradation."
(page28).
3.
Choose "Screen" from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars
Procedure
1. Choose "Analog Adjustment" in the "Screen" menu, and press
2. Choose "Clock" in the "Analog Adjustment" menu, and press
The "Clock" menu appears.
3. Adjust the clock with
Press or slowly so as not to miss the adjustment point.
4. Press to exit.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "To remove flickering or blurring ".
26
Chapter2AdjustingScreens
or , and press .
or to eliminate vertical bars.
.
.
.
.
.