To Set Input Signal Selection; Making Use Of Usb (Universal Serial Bus); Required System Environment - Eizo FlexScan EV2316W User Manual

●

To set input signal selection

Setting
Auto
Manual
Procedure
1. Choose "Monitor Settings" from the Adjustment menu, and press
2. Choose "Input Signal" from "Monitor Settings", and press
3. Select "Auto" or "Manual" with
4. Press to exit.
Note
• If you select "Auto", the monitor enters the power saving mode after all the PCs have entered the power saving mode or
have been switched off.

6-5. Making Use of USB (Universal Serial Bus)

This monitor has a USB hub. It works as a USB hub when connected to a USB-compatible PC, allowing the
connection of peripheral USB devices.
●

Required System Environment

• A PC equipped with a USB port
• Windows 2000 / XP / Vista / 7 / 8 or Mac OS 9.2.2 and Mac OS X 10.2 or later
• USB cable (commercially available product)
Attention
• This monitor may not work depending on PC, OS or peripheral devices to be used. For USB compatibility of peripheral
devices, contact their manufacturers.
• When the monitor is in power saving mode, devices connected to the USB downstream port will still work. Therefore,
power consumption of the monitor varies with connected devices even in the power saving mode.
• When the main power of the monitor is Off, a device connected to the USB downstream port will not operate.
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Themonitordisplaysthesignalfromtheselectedconnectordespitethesignalinput.Select
theinputsignalfordisplayusingthe
or .
Function
operationbutton.
.
.
Chapter6Reference
53