Connecting The Printer; Selecting A Connection Method - Xerox Phaser 6022 User Manual

Installation and Setup

Connecting the Printer

This section includes:
•

Selecting a Connection Method .................................................................................................................................... 32

• Connecting to a Computer Using USB ....................................................................................................................... 33
• Connecting to a Wired Network .................................................................................................................................... 33
• Connecting to a Wireless Network................................................................................................................................ 33
• Connecting to Wi-Fi Direct ............................................................................................................................................... 35
Selecting a Connection Method
You can connect to your printer directly using Ethernet, USB, wireless, or Wi-Fi Direct. The method you
select depends on how your computer connects to the network. A USB connection is a direct connection
and is the easiest to set up. A wireless connection is used for networking. If you are using a network
connection, it is important to understand how your computer is connected to the network. For details,
see About TCP/IP and IP Addresses
Note: Hardware and cabling requirements vary for the different connection methods.
• Network: If your computer is connected to an office network or home network, use an Ethernet
cable to connect the printer to the network. You cannot connect the printer directly to the computer.
It must be connected through a router or hub. An Ethernet network can be used for one or more
computers and supports many printers and systems simultaneously. Ethernet connection is typically
faster than USB and allows you direct access to the settings of the printer using CentreWare
Internet Services.
Wireless Network: If your computer includes a wireless router or wireless access point, you can
•
connect the printer to the network with a wireless connection. A wireless network connection
provides the same access and services as a wired connection provides. A wireless network
connection is typically faster than USB and allows direct access to the setting of the printer using
CentreWare Internet Services.
You can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,
using Wi-Fi Direct.
Note: Wi-Fi Direct is disabled by default. Xerox recommends that only one user at a time accesses the
printer using Wi-Fi Direct.
Note: A Wi-Fi Direct connection does not provide network access.
USB: If you connect the printer to one computer and do not have a network, you can use a USB
•
connection.
Note: A USB connection does not provide access to CentreWare Internet Services.
® ®
32 Xerox Phaser 6022 Printer
User Guide
on page 42.