Setting The Clock; Programming Brew Temperature; Programming Your Brew Size; Programming On/Off Features - Keurig B150P Owner's Manual

(continued)
SECTION 2 Menu Controls & Indicators

Setting the Clock

Setting the clock is optional. When the clock is set, the time will appear in the
LCD Control Center.
NOTE: You must set the clock if you will be programming
the Auto On/Off Time feature.
1. From the Menu Mode, press "CLOCK".
11
fig.
2. The set clock screen will display
"DISABLED" if the Brewer is new or if
electrical power has been interrupted.
Clock
Press "DISABLED" to set a time. Press H
repeatedly to advance the hour in steps or
12:00 AM
hold it down to scroll through the hours
H M
quickly. When you have set the hour then
press the M to set the minutes, press
repeatedly to advance by a minute each time
OK
or keep it pressed to scroll quickly (fig.11).
3. Press "OK" when you are finished.
The Clock is now set.
4. The correct time should now be displayed in
the LCD Home Screen.
NOTE: If power is interrupted to the Brewer, follow the procedure above to
reset the time as the clock will not be visible . Brew size and brew tempera-
ture menu settings will be restored automatically. All other settings will be
restored automatically after clock is set.
NOTE: To disable the clock, press the time. However, the 'On/Off' time setting
will also be disabled.
Programming Brew Temperature (188° – 198º F)
The Brewer brews at a preset temperature of 193°F. You can adjust this
temperature up or down by 5°. Simply follow the instructions below.
1. From the Menu Mode, press "BREW TEMP".
14 12
2. The LCD Display will now display the Brew
fig. fig.
Temperature programming options (fig.12).
The temperature 193°F (initial setting) will
be displayed at the top of the LCD Display
Temperature
to indicate the current temperature setting.
193°F Press the + symbol to increase the tempera-
3 .
ture and the – symbol to lower the tempera-
- +
ture one degree at a time.
4. Once you have reached your desired brew
OK
temperature, press "OK". The Brew Tempera-
ture is now set.
5. To change the brew temperature, repeat
steps 1 through 4.
NOTE: At high altitudes (over 5,000 feet)
if boiling occurs, use the temperature
adjustment (-5°) to lower the temperature.
12

Programming Your Brew Size

All brew sizes are enabled in the default setting. If you want to disable any
brew size, just press on the appropriate icon(s). Please follow instructions
outlined below.
1. From the Menu Mode, press
13
fig.
"SET BREW SIZE(S)".
The LCD will display all enabled brew sizes.
2.
To disable a brew size press the icon. The
3
OK check mark will change to an "X" indicating
4 Oz.
that the brew size is disabled (fig.13).
3 3
Once you have selected your desired brew
3.
6 Oz. 8 Oz. size(s), press "OK". The brew size(s) are now
3
set.
NOTE: You can not delete all brew sizes.
10 Oz. 12 Oz.
To enable a brew size you have already
disabled, just press its icon and then
press "OK". The default brew size is
always 8 oz. This brew size cannot be
changed or disabled.

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea
or hot cocoa on your own schedule.
1. Leave it ON all the time. The Brewer can be left
14
fig.
on all the time so that it is always ready to
brew a fresh cup of gourmet coffee, tea or hot
cocoa. To turn the Brewer off at any time,
ON/OFF Time
simply press and release the Power Switch.
ON 12:00 AM Press and release the Power Switch again to
H M
restore power to the Brewer. You will have to
wait for the water to heat up before the Brewer
OFF 12:00 PM
is ready to brew.
H M
Program the Brewer for a specific On/Off
2.
OK
Time. NOTE: To use this programming feature,
the clock must be set to the correct time.
a. After setting the correct time (see "Setting The Clock" page 12), return to
the Menu Mode and press "ON/OFF TIME".
b. To set the ON time, press "DISABLED". The display will change to a time of
day. Press "H" to set the hours and "M" to set the minutes. Once the
desired time is set, press "OK" to accept this time.
c . To set the OFF time, press "DISABLED". The display will change to a time
of day. Press "H" to set the hours and "M" to set the minutes. Once the
desired time is set, press "OK" to accept this time (fig.14).
13