Requirements; Installation And Setup - Aastra 6737i User Manual

Welcome

Requirements

The 6737i IP Phone requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP account created for the 6737i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server,
or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps) recommended)
• Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet
performance)
• Power source
– For Ethernet networks that supply in-line power to the phone (IEEE 802.3af ):
–For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No
48v AC power adapter required.)
– For Ethernet networks that DO NOT supply power to the phone:
–(optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is
available as an optional accessory from Aastra. Contact your Administrator for more information.

Installation and Setup

If your System Administrator has not already setup your 6737i phone, please refer to the Aastra 6737i Installation Guide
for basic installation and physical setup information. For more advanced administration and configuration information,
System Administrators should refer to the Aastra SIP IP Phones Administrator Guide.
2
41-001452-05 REV02 – 07.2014