Using Intercom - Aastra 6737i User Manual

Using Intercom

On the 6737i, you can use the Icom key to automatically connect with a remote extension. By default, the Intercom key is
configured as Key 4 on the top set of softkeys.
Using the Icom Key
IP Phone UI
1. Press the Icom key.
2. Enter the extension number of the person you wish to intercom or the BLF key for that extension.
3. After a beep tone, your phone automatically connects with the remote extension and you can speak through its
speaker.
4. To cancel intercom, press
5. When you are finished speaking, hang up the phone by placing the handset back on-hook or by pressing
or the line/call appearance key for the active call. When you hang up, the remote phone also hangs up.
You can set specific incoming Intercom call features on the 6737i IP phone using the Aastra Web UI. The following table
describes these features.
Incoming Intercom Features in Aastra Web UI
Microphone Mute
Auto Answer
Play Warning Tone
Allow Barge In
For more information about the incoming Intercom features and for procedures on setting these features, see
Intercom Call Features" on page
41-001452-05 REV02 – 07.2014
or the Cancel key.
Description
Allows you to enable or disable the microphone on the IP phone for Intercom calls made by the
originating caller.
Allows you to enable or disable the IP phone to automatically answer an Intercom call. If auto-
answer is enabled on the IP phone, the phone plays a tone (if "Play Warning Tone" is enabled) to
alert the user before answering the intercom call. If auto-answer is disabled, the phone treats the
incoming intercom call as a normal call.
Allows you to enable or disable a warning tone to play when the phone receives an incoming
intercom call on an active line.
Allows you to enable or disable how the phone handles incoming intercom calls while the phone
is on an active call.
169.
Making Calls
Intercom Key
"Incoming
109