Last Call Return (Lcr) Key; Only) - Aastra 6737i User Manual

Last Call Return (LCR) Key

Using the Aastra Web UI, you can configure the "Last call return" (LCR) function on a key. This feature is for Sylantro servers
only. If you configure "LCR" on a key, and a call comes into your phone, after you are finished with the call and hang up, you
can press the key configured for "LCR" and the phone dials the last call you received. When you configure an "LCR" key, the
label "LCR" displays next to that key on the IP phone. When the Sylantro server detects an "LCR" request, it translates this
request and routes the call to the last caller.
Configuring a Last Call Return Key
Aastra Web UI
Use the following procedure to configure a Last Call Return key on the 6737i IP Phone.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Last Call Return.
4. In the "Line" field, select the line you want to apply to this key.
Valid values are 1 through 9.
5. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from "Key 1" through "Key 36" (M670i)
or
Select from "Key 1" through "Key 60" (M675i)
7. In the "Type" field, select Last Call Return.
8. In the "Line" field, select the line you want to apply to this key.
Valid values are 1 through 9.
9. Click Save Settings.
41-001452-05 REV02 – 07.2014
(Sylantro Servers only)
Line Keys and Softkeys
79