Table of Contents
Advertisement
DD12
USER GUIDE
When fitted with a scaffold clamp - either a standard half-coupler or trigger clamp (as shown) -
the DD12 can be mounted either way up in portrait orientation, or in landscape orientation; the
bracket allows the tilt to be adjusted in either case.
If more extreme angles of down-tilt are necessary, a second clamp position may be used in
conjunction with the supplied spacer block.
Horizontal adjustment after mounting may be performed by not fully tightening the bolt securing
the clamp; this will leave a small degree of play for accurate cabinet alignment.
For fixed installations, we suggest using a length of M12 (½") high tensile steel studding hanging
vertically down and a pair of locking nuts to attach it to the bracket.
Fitting the bracket:
The only tool required to fit the bracket to the cabinet is a 5 mm hex (Allen) key. Attaching a pole
mount adaptor or scaffold clamp will also require spanners or adjustable grips to suit the size of
bolt used to attach the accessory to the bracket.
The bracket is supplied with two M8 x 35 mm countersunk head fixing screws
(Part No. FAA08018), and the spacer block.
DD12 User Guide V1.0
23
Advertisement
Table of Contents
