Table of Contents
Advertisement
DD12
USER GUIDE
REAR CONNECTION PANEL
MAINS INLET
The DD12 mains inlet is located on the rear of the cabinet and is a Neutrik® PowerCON TRUE1
Male receptacle, single phase, IP65 rated inlet connector. A mating IP65 PowerCON TRUE1
plug (without lead) is supplied as standard with the DD12. A comprehensive mains cabling
solution with C Form IP-rated input connectors is available for the DD12, which includes IP65-
rated female outlets.
VELCRO LOOP
Typical use shown of the Neutrik® PowerCON TRUE1 connector system for powering appliances,
and making up extension cables.
Neutrik® powerCON TRUE1 connector assembly instructions
The PowerCON TRUE1 system is certified as a connector with breaking capacity according to
IEC60320 and VDE0625. It is intended for use as an appliance and interconnection coupler. It
serves to supply power to an appliance. It should be installed by qualified personnel only.
DD12 User Guide V1.0
UN-ACTIVATED CLEAR HEAT-SHRINK
CEEFORM MALE LINE CONNECTOR
BALS PART NO. 21238 OR MARTIN
AUDIO APPROVED EQUIVALENT.
APPLIANCE INLET
NEUTRIK NKPF-NC-A-5 FEMALE
POWERCON TRUE 1 CONNECTOR.
OVERMOULDED FOR IP65 RATING.
CABLE EXTENSION
13
Advertisement
Table of Contents
