Table of Contents
Advertisement
DD12
USER GUIDE
Mate the spigot on the lower arm with the top hat insert in the cabinet bottom.
Then attach the upper arm to the cabinet top through the central hole with either the handwheel
or the M8 x 40mm bolt. Put both the spring washer (first), then the plain washer (second) onto
the handwheel or bolt. Screw into the cabinet insert. Tighten the fixing sufficiently to make it
safe but allowing any fine adjustment if required. Finally, replace the M8 x 70 mm bolt in the
yoke upper arm to secure it and tighten.
DD12 User Guide V1.0
28
Advertisement
Table of Contents
