Table of Contents
Advertisement
DD12
USER GUIDE
IMPORTANT: It is essential that the M8 x 35 screws are used to fit the bracket. Do not use the
existing screws in the cabinet M8 inserts, which are too short, and are not rated for use with
flown systems. A flown DD12 using these screws to fix the bracket will NOT be safe.
The bracket may be fixed to the cabinet in a number of different positions, on the top, bottom or
side (relative to portrait orientation). The fixing locations are central in each face; note that the
cabinet has additional M8 inserts which are not relevant to the bracket fixing. The bracket will
only align correctly with the correct inserts.
DD12 User Guide V1.0
24
Advertisement
Table of Contents
