Wireless Distribution System - D-Link DSL-G624T User Manual

DSL-G624T Wireless ADSL Router User Guide

Wireless Distribution System

The Router's access point supports Wireless Distribution System (WDS) to enable interconnection with
other access points through the wireless network. WDS facilitates roaming between different access points
and connectivity to the Ethernet and Internet. WDS is also used to connect two distant Ethernet LAN groups
that may be be difficult or impractical to connect to each other with cable. The access point can perform
different functions in the WDS depending on the mode that is chosen. To use WDS, first select the WDS
Mode the access point will use from the pull-down menu, and configure the available parameters for the
selected mode. See the table below for a description of the different modes and parameters used to configure
the access point.
Wireless Management - WDS menu
When WDS is enabled, the Router's access point will operate in one of three modes, Bridge mode,
Repeater mode or Crude mode. Use the table below as a guide to how each mode functions in the WDS.
79