Dns - D-Link DSL-G624T User Manual

DNS

The Router can be configured to relay DNS settings from your ISP or another available service to
workstations on your LAN. When using DNS relay, the Router will accept DNS requests from hosts on the
LAN and forward them to the ISP's, or alternative DNS servers. DNS relay can use auto discovery or the
DNS IP address can be manually entered by the user. Alternatively, you may also disable the DNS relay and
configure hosts on your LAN to use DNS servers directly. Most users who are using the Router for DHCP
service on the LAN and are using DNS servers on the ISP's network, will leave DNS relay enabled (either
auto discovery or user configured).
In the DNS Relay Selection pull-down menu, choose to Use Auto Discovered DNS Server Only, Use User
Discovered DNS ServerOnly or Disable DNS Relay.
If you have not been given specific DNS server IP addresses or if the Router is not pre-configured with DNS
server information, select the Use Auto Discovered DNS ServerOnly option. Auto discovery DNS instructs
the Router to automatically obtain the DNS IP address from the ISP through DHCP. If your WAN
connection uses a Static IP address, auto discovery for DNS cannot be used.
If you have DNS IP addresses provided by your ISP, enter these IP addresses in the available entry fields for
the Preferred DNS Server and the Alternative DNS Server.
If you choose to Disable DNS Relay, it will be necessary to configure DNS settings for hosts on the LAN
since they will not be depending on the Router to forward the DNS requests.
When you have configured the DNS settings as desired, click the Apply button.
To use DNS Relay for computers on your local network, DNS Service Filtering must be
disabled. See the Firewall section in the next chapter.
Note
DSL-G624T Wireless ADSL Router User Guide
DNS Configuration menu
48