Multiple Virtual Connections - D-Link DSL-G624T User Manual

Multiple Virtual Connections

The Router supports multiple virtual connections. Up to eight PVCs to eight separate destinations can be
created and operated simultaneously utilizing the same bandwidth. Additional PVC connections can be
added for various purposes. For example, you may want to establish a private connection to remote office in
order to create an extended LAN, or setup a server on a separate connection. Provisioning for additional PVC
profiles must be done through your telecommunications services provider. Extended LAN operations
employing multiple virtual connections require ADSL routers or modems at the remote site for a successful
connection. Contact your ISP or telecommunications service provider if you are interested in setting up
multiple virtual connections.
After the necessary arrangements have been made to use the Router with multiple virtual connections, follow
the instructions below to setup the Router using the VPI/VCI settings given to you by your server provider.
Configure Multiple PVCs
Additional PVCs can be configured by first accessing the WAN configuration window in the Home
directory.
The PVC pull-down menu offers eight virtual connections available for configuration. The default PVC used
by the Router is labeled Pvc0. Any additional connections that are configured must have a VPI/VCI
combination that is unique to the Router. These numbers will have been already been established by your
service provider on their network.
To add a new virtual connection:
1. Select the new PVC to configure from the pull-down menu.
2. Enter the values for the VPI and VCI given to you by your service provider.
3. To activate the VC, select Enabled from the Virtual Circuit pull-down menu.
4. Configure the WAN Settings and Connection Type as desired.
5. To save the new settings, click the Save and Reboot button (Tools > System). The new connection
will activate upon restarting.
DSL-G624T Wireless ADSL Router User Guide
Select new PVC to configure in the WAN Settings menu
51