Virtual Server - D-Link DSL-G624T User Manual

Virtual Server

Use this window to set up single-port, trigger port or static-port range forwarding rules applied to inbound
(WAN-to-LAN) traffic. The Virtual Server function allows remote users to access services on your LAN
such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-G624T will accept remote requests
for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and
then redirect these requests to the server on your LAN with the LAN IP address you specify. Remember that
the specified Private IP Address must be within the useable range of the subnet occupied by the Router.
UDP/TCP port redirection is used to direct inbound traffic to the specified servers or workstations on your
private network. Port redirection can also be used to direct potentially hazardous packets to a proxy server
outside your firewall. For example, you can configure the Router to direct HTTP packets to a designated
HTTP server in the DMZ. You can define a set of instructions for a specific incoming port or for a range of
incoming ports. Each set of instructions or rule is indexed and can be modified or deleted later as needed.
The Virtual Server options include a list of preconfigured rules (listed below) for commonly used protocols
in the Virtual Server List. To enable a preconfigured rule, click the selection box for the rule you want to
enable and click the Apply button.
Use the LAN Clients window to select eligible IP addresses before configuring forwarding rules.
See LAN Clients below.
Note
DSL-G624T Wireless ADSL Router User Guide
Virtual Server menu
54