D-Link Smart WLAN Manager User Manual
Configure the Wireless System
Configure the Wireless Switch
In Monitor AP, choose the view by Tree or topology, and double click the wireless switch you want to change the setting, and the
configuration window will pop up.
System Configuration
IP Address – Users can choose static or dynamic (DHCP) IP address for the
wireless switch. When static IP is selected, please manually input the IP
Address, Subnet Mask and Gateway IP.
LLDP – Select to Enable or Disable the LLDP function. When the LLDP
function is enabled, the LLDP will begin searching the access points.
Name - Enter the system name for the wireless switch.
Location - Enter the location of the wireless switch.
20
D-Link Corporation