D-Link DSL-G624T User Manual page 35

Make sure the Enable AP checkbox at the top of the window has been checked.
Click to select the WPA, WPA2 (WPA2 only) or AnyWPA (both WPA and WPA2) radio button.
In the Group Key Interval entry field, enter a Time (in seconds) after which the Group Key is changed
automatically.
Select either Radius Server or Pre-Shared Key depending on the varification you are using for the Wireless
network.
If you are using a Radius Server for authentication, select the Radius Server button and enter the server IP
Address of the RADIUS server, a Port number (or accept the default), and a "Shared" Secret (1-63
characters).
If you are using a Pre-Shared Key, type an alphanumeric value of 1-63 characters in length used for
authentication.
Click Apply.
DSL-G624T Wireless ADSL Router User Guide
Notice: The values needed for Radius authentication can be
obtained from your Internet Service Provider (ISP).
27