Samsung MWR-WE10N Installation Manual page 22

Main Sub
menu menu
1
Master setting/checking
(F3F4 line Indoor unit master)
2
7
Mode master indoor unit
3
setting/checking
(F1F2 line Indoor unit master) 3)*
4
1
0 2 Reset
3
1)* The total option codes are 24 digits. You can set six digits at a time and it is distinguished by page number.
Press [>] button to go to the next page.
Page number Option Code
1 2 3 4 5 6
Regardless of Celsius and Fahrenheit setting, service mode setting is available only with Celsius.
2)* If you enter Main menu #4, you must select the targeted indoor unit address and then select the sub menu.
3)* Setting is available when there is only 1 indoor unit connection and while the indoor unit operation is not operating.
4)* Power Master Reset is a setting needed to supply optimized power to wired remote controller when multiple indoor
units are connected to wired remote controller in a group.
Function
Indoor unit Master setting/
checking
ERV unit Master setting/
checking
Mode master indoor unit
checking
Mode master indoor unit setting
Factory setting
Power Master Reset 4)*
Addressing Reset
SEG1 SEG2 SEG3
0
Page number
SEG7 SEG8 SEG9
1
Page number
SEG13 SEG14 SEG15
2
Page number
SEG19 SEG20 SEG21
3
Page number
Data Factory
Description
bit setting
123456 - address
123456 - address
123456 - address
1 - 0-No use, 1-Use, 2-Release
1 0 0-No use, 1-Reset
1 0 0-No use, 1-Reset
1 0 0-No use, 1-Reset
SEG4 SEG5 SEG6
SEG10 SEG11 SEG12
SEG16 SEG17 SEG18
SEG22 SEG23 SEG24
Unit
-
-
-
-
-
-
-
21