Machine Tie-Downs - Windsor Chariot 2 CBPS20 Operating Instructions Manual

Maintenance
Preparation for Loading/Unloading Trailer
Burnisher Deck must be in the up position before loading.
When transporting the machine on a trailer or in a truck, in addition to using tie-downs, be sure to block the tires to
prevent the machine from rolling.

Machine Tie-Downs

There are two tie points located in front of the rear wheels on the frame, and a Tie-down wrap point on the back
panel. Tie-down devices must be of the proper type and strength. The combined strength of all tie-downs must be
strong enough to lift two times the weight of the machine. Tie-downs must be positioned to prevent the machine
from moving forward, backward, or either side to side. Use all four corners of the machine with the tie-downs
running out opposite directions. Tie-downs must be attached to the transporting vehicle securely.
Recommended Tie-Down Points
CONNECT
AT
FRAME
VIEW FROM
BOTTOM
40 86356230 Chariot iGloss