System Mode Parameters - Lexicon MPX 200 User Manual

System Mode
Note:
System parameters are automatically saved with
each change. Changes you make to these con-
trols are applied immediately (except for Global
Compressor Mode) and remain in that state until
changed again.
To exit System Mode, press & hold Bypass again for
approximately two seconds. The display will
flash "Sto" to verify that any changes you made
have been stored.
3-2

SYSTEM MODE PARAMETERS

1. Output Level 0 dB - Off
2. Input Source Analog* or Digital
(S/PDIF)
3. Digital Dry or Processed*
Output
4. Global Mix Program* or Global
Mode
5. Bypass Mode Mute All/Quiet (qui),
Input Mute (inp), or
Bypass (dry)*
6. Program Mute or Bypass*
Load
7. Global Tempo Program*or
Mode (Tap) Global
8. Global Program* or
Compressor Mode Global
9. Patching Off or On*
* designates default value
Lexicon, Inc.