Lexicon MPX 200 User Manual page 30

System Mode
15. Dump User Bank: Allows you to execute a MIDI
bulk dump that transmits the User programs for
storage to an external sequencer or computer.
Press Store to execute the dump. User Programs
are dumped in four groups of 16—beginning with
1, 17, 33, and 49. Rotate the Adjust knob to select
which group to dump.
16. Dump Current Program: Allows you to execute a
MIDI dump that transmits the current program for
storage to an external sequencer or computer.
Press Store to execute the dump.
17. Dump System: Allows you to execute a MIDI
dump that transmits all system parameters and
MIDI patches for storage to an external
sequencer or computer. Press Store to execute
the dump.
18. Clear User Bank: Erases the contents of all 64 User
programs in the User Bank. Press Store to
execute. The display will show "Clr"
briefly to verify that the User Bank has been
cleared.
3-6
Note:
You cannot clear the User Bank while you are run-
ning a User Program.
19. Initialize: Restores all adjustable parameters of
the MPX 200 back to its factory default state. This
includes all User programs, System parameters
and Learned patches. Press Store to execute. The
display will show "rSt" while this is taking
place. This requires about one minute to
complete.
Warning:
Both "Clear User Bank" and "Initialize" erase all
Programs stored in the User Bank.
Lexicon, Inc.