Using The Printer Control Panel - Lexmark Prevail Pro700 Series Reference Manual

Use the To
11 Paper tray Load paper.
12 Paper exit tray Hold paper as it exits.
3
2
1
9
Use the To
1 Scanner unit Access the ink cartridges.
2 Ink cartridge access Install, replace, or remove the ink cartridges.
3 Ethernet port Connect your printer to a computer, a local network, an external DSL, or a
cable modem.
4 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
5 LINE port Connect the printer to an active telephone line (through a standard wall
jack, DSL filter, or VoIP adapter) to send and receive faxes.
4
5
6
7
8
Use the To
6 EXT port Connect additional devices (telephone or answering machine) to the printer
and the telephone line. Use this port if you do not have a dedicated fax line
for the printer, and if this connection method is supported in your country
or region.
Note: Remove the plug to access the port.
7 Power supply with port Connect the printer to a power source using the power cord.
8 Duplex unit
• Print on both sides of a sheet of paper.
•
Remove paper jams.
9 Printhead access Install the printhead.
Note: The carrier moves to the printhead access area when no printhead
is installed in the printer.

Using the printer control panel

The following diagrams explain the sections of the printer control panel:
6