Using Memory Cards And Flash Drives - Lexmark Prevail Pro700 Series Reference Manual

Use To
3 Dialtone Dial the telephone number manually using the keypad before sending the fax.
4 Color/Black Switch to color mode or black-and-white mode.
5 Start Start a job, depending on which mode is selected.
6 2-Sided/Eco Mode Activate 2-Sided to:
•
Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
•
Change to Power Saver mode after the printer is left idle for ten minutes.
• Set screen brightness to low.
7 Cancel
• Cancel a print, copy, scan, or fax job in progress.
•
Exit from a menu level of the Copy, Scan, Fax, Photo, or File Print menu to
the top level of a menu.
•
Exit from a menu level of the Setup menu to the top level of the previous
mode.
• Clear current settings or error messages, and return to default settings.
8 Keypad In Copy mode or Photo mode: enter the number of copies or prints you want to
make.
In Fax mode:
• Enter fax numbers.
•
Navigate an automated answering system.
• Select letters when creating a Speed Dial list.
•
Type numbers to enter or edit the date and time shown on the display.

Using memory cards and flash drives

Using a memory card or flash drive with the printer
Memory cards and flash drives are storage devices frequently used with cameras and computers. You can
remove the memory card from the camera or the flash drive from the computer and insert it directly into
the printer.
1
Insert a memory card into the card slot or a flash drive into the USB port.
Inserting a memory card
Notes:
•
Insert the card with the brand name label facing
right.
• Make sure any arrows on the card point toward
the printer.
• If necessary, connect the memory card to the
adapter that came with it.
•
Make sure that the memory card inserted is
supported by the printer. For more information,
see "Supported memory cards and file types"
on page 9.
8
Inserting a flash drive
Notes:
•
The flash drive uses the same port that is used
for a PictBridge camera cable.
• An adapter may be necessary if your flash drive
does not fit directly into the port.