Attaching The Viewfinder To A Camera - Sony DVF-L700 Operating Instructions Manual

Lcd color
Table of Contents

Advertisement

Attaching the Viewfinder
to a Camera
Note
Depending on the version of your PMW-F5/F55, an
image may not be displayed.
In such cases, contact a Sony service representative.
Attach this unit to the camera using the supplied flexible
arm.
This unit has a total of three flexible arm attachment
points at the top, bottom, and rear of the unit. Select an
attachment point based on your intended use.
Top attachment point
Bottom attachment point
6

Attaching the Viewfinder to a Camera

Rear attachment point
This section describes how to attach the flexible arm to
the top of the unit as an example.
Notes
• Hold both the viewfinder and the flexible arm firmly
when performing attachment or detachment.
In addition, the flexible arm may move at its joints if the
arm lock knob is loose. Take care not to drop the
viewfinder and flexible arm.
• Fixing screws are located on both ends of the flexible
arm. Confirm the camera end and the viewfinder end,
and perform attachment using the proper ends.
Camera attachment point: Includes edges that fit the
camera's handle.
Viewfinder attachment point: Includes a positioning
pin.
1
Attach the flexible arm to the camera.
Arm lock knob
2
Align the screw on the flexible arm's camera
1
attachment point with screw hole (1/4-20UNC) on
top of the camera's handle.
Make sure the camera attachment point is oriented
correctly in relation to the handle.
Camera
attachment point
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents