Advertisement
Quick Links
Manual for Camera Housing - Model DSC-F707 / 717 (Sony)
User Manual
Contents:
1. Introduction
1. Introduction
10 BAR Underwater Housings are small, light and rugged enough to be used on
every dive. Use of a clear polycarbonate allows for visual inspection of camera
condition and the O-ring seal. 10 BAR Housings are designed for the ever-
increasing variety of models of digital still and video cameras. Advanced computer
aided design and CNC manufacturing technologies ensure precise dimensions. Each
housing body is first injection molded, and then machined to configure to individual
camera model. A range of lens ports and controls are fitted, to tailor the housing to
your camera model.
1
5/7/2005
Advertisement
Related Manuals for Sony DSC-F707 / 717
Summary of Contents for Sony DSC-F707 / 717
-
Page 1: Table Of Contents
Manual for Camera Housing - Model DSC-F707 / 717 (Sony) User Manual Contents: 1. Introduction 2. Specification 3. Set up Instructions 4. Use & Care of Housing 5. Service 6. Warranty 1. Introduction 10 BAR Underwater Housings are small, light and rugged enough to be used on every dive. -
Page 2: Specification
2. Specification Test Pressure Closure Design Body Material Overall Size Total Weight Buoyancy (with camera) Additional Features Accessories 1. Dial Mode 5. Power Switch 2. Shutter 6. LCD Screen 3. Jog Dial 7. Control Button 4. Exposure Button 8. Menu Button 10 Bar (300 ft.) Housings are individually tested Air Lock Polycarbonate... -
Page 3: Set Up Instructions
3. Set up Instructions 3.1 Pressure release plug: The body and lid are designed with a “no clip” closure arrangement. Testing has shown that this arrangement allow the water to exert an even pressure on the O -ring, increasing the reliability of the watertight seal. To open the housing, the pressure release plug must be first unscrewed and then pulled out all the way. - Page 4 3.3 Special note on responsibility for watertight integrity: Each housing is individually inspected and hydrostatically tested in the factory. The design of the piston O-ring seal is among the most reliable in the industry and the watertight integrity is excellent. This special O-ring design provides a perfect seal even if there is any movement between the body and lid due to change of ambient pressure.
- Page 5 that no contamination such as dus t, hair, salt, etc. has fallen onto the O-ring or O-ring recess, as a precaution we recommend maintaining the O-ring every time the lid is opened. Procedure: Place the lid on a firm non-slip level surface. The O-ring can be extracted using an O-ring extractor tool (make sure the tool has no sharp edges).
-
Page 6: Use & Care Of Housing
Replace the lid. Remember to ensure the pressure release plug is pulled all the way out while closing, otherwise the air cannot escape. Squeeze the lid closed all the way, you will hear the hiss of air being expelled. Screw home the pressure release plug. There is no need to excessively tighten this plug. -
Page 7: Service
salt deposits that may have built up. No chemical cleaners should be used. Mild detergents e.g. shampoo and soap based cleaners are permitted. Important, Polycarbonate may be harmed by some household chemicals, the housing should never be exposed to the following classes of chemicals: benzene, toluene, xylene, chlorinated hydrocarbons, methanol, any other solvents, strong acids and bases. -
Page 8: Warranty
6. Warranty The warranty is valid within two years from the date of first purchase. The warranty applies only to the housing itself. liability either implicit or otherwise for any equipment housed inside, or used together with the housing. period of warranty, 10 BAR will repair or replace the housing. Please note that disassembly of the housing will invalidate warranty. - Page 9 (Copy to be returned to 10 Bar Underwater Housings) The warranty is valid within two years from the date of first purchase. The warranty applies only to the housing itself. liability either implicit or otherwise for any equipment housed inside, or used together with the housing.