Sony DVF-L700 Operating Instructions Manual page 5

r DC IN connector
When using monitor mode, connect this to an external
power supply (10.5 V to 17.0 V DC) using the supplied
power cable (with "STRAIGHT CABLE" label). When
using the PMW-F5/F55, connect to the DC OUT
connector on the battery adaptor.
The power cable (with "STRAIGHT CABLE" label) is
not necessary when using VF mode, as power is supplied
via the VF connector.
Note
Use the power cable supplied with this unit.
The power cables (without "STRAIGHT CABLE"
labels) supplied with units with serial numbers X00001 to
X00999 are crossover cables. Therefore, they cannot be
used with units with other serial numbers.
s MONITOR OUT connector (BNC type)
Outputs the same signal that is input to SDI IN.
Notes
• The MONITOR OUT output is only output when the
power of the unit is set to ON. There is not output when
power is not being supplied to the DC IN connector, or
when power is being supplied but the POWER switch
is set to SAVE.
• The MONITOR OUT output does not meet the output
standards of a main line channel.
t SDI IN connector (BNC type)
When using monitor mode, connect this to the SDI OUT
connector on the camera using a BNC cable.
For details on supported formats, see "Specifications"
(page 10).
u – (minus) button
Use this after pressing the BRIGHT, CONTRAST, or
PEAKING button to change the respective value.
v + (plus) button
Use this after pressing the BRIGHT, CONTRAST, or
PEAKING button to change the respective value.
w PEAKING adjustment button
Allows you to emphasize the outlines in the image. This
does not affect the camera's output signal.
x CONTRAST adjustment button
Allows you to adjust the contrast in the image. This does
not affect the camera's output signal.
y BRIGHT adjustment button
Allows you to adjust the brightness in the image. This
does not affect the camera's output signal.
z HIGH BRIGHT (high-brightness display)
button
Brightens the display to improve visibility when shooting
outdoors. This does not affect the camera's output signal.
The HIGH BRIGHT indicator lights during high-
brightness display.
The display switches between high-brightness display
and normal display with each press of the button.
During high-brightness display, the CONTRAST button
is disabled and the contrast cannot be adjusted.
wj Flexible arm attachment points
Attach the supplied flexible arm here.
Note
Do not block the ventilation inlet and outlet. Doing so
may result in internal overheating and malfunctions.
5
Parts Identification