Cleaning The Photoconductor Drum - Lexmark X215 MFP User Manual

Returning the empty toner cartridge
Using the Lexmark Cartridge Return Program is a free and easy way to return cartridges directly to
Lexmark for appropriate environmental handling.
Place the empty cartridge into the box from the new replacement cartridge. Reseal the box with clear
packing tape, and then apply a prepaid return shipping label. (The shipping label is available online
at www.lexmark.com/or
Note: Details may vary by country, but the program is always available at no charge. Visit
our web site,
contact your Lexmark representative or the place where you bought your machine
for information on the program.

Cleaning the photoconductor drum

If there are streaks or spots on your print, the photoconductor drum may require cleaning. Your
operator panel menu includes a Clean Drum option that may help to improve the print quality.
To clean the photoconductor drum:
1
Make sure paper is loaded.
2
Press Menu until MACHINE SETUP appears on the top line of the display, and then press
Select.
3
Press the scroll button
and then press Select.
The machine prints out a cleaning page. Toner particles on the photoconductor surface are
affixed to the paper.
If the problem persists, repeat these steps.
If you have cleaned the photoconductor drum several times and the problem is still unresolved, install
a new toner cartridge.
at no cost to you.)
www.lexmark.com/or
or
until CLEAN DRUM appears on the bottom line of the display,
Maintaining the toner cartridge
for country-specific instructions. You can also
68