Lexmark X215 MFP User Manual page 88

Problem
Page skew
Curl or wave
Wrinkles or creases
Back of printout is dirty
Black pages
• Check the paper type and quality. See page 21.
• Ensure that the paper or other material is loaded correctly and the guides
are not too tight or too loose against the paper stack. See page 21.
• Check the paper type and quality. Both high temperature and humidity
can cause paper curl. See page 21.
• Turn over the stack of paper in the paper tray. Also try rotating the paper
180° in the tray.
Ensure that the paper is loaded properly.
• Check the paper type and quality. See page 21.
• Turn over the stack of paper in the paper tray. Also try rotating the paper
180° in the tray.
• The transfer roller may be dirty. See page 62.
• Check for leaking toner. Clean the inside of the machine. See page 63.
• The toner cartridge may not be installed properly. Remove the cartridge
and reinsert it.
• The toner cartridge may be defective and need replacing. Install a new
toner cartridge. See page 65.
• The machine may require repair. Contact a service representative.
Solving problems
88
Solution