Lexmark X215 MFP User Manual page 95

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including fax machines, to send any message unless said message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity, or other
individual sending the message, and the telephone number of the sending machine or such
business, other entity, or individual. (The telephone number provided may not be a 900 number or
any other number for which charges exceed local or long-distance transmission charges.)
See "Setting the station ID" on page 17 in order to program this information into your fax machine.
Notice to users of the Canadian telephone network
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed
to be connected to a telephone interface. The terminus of an interface may consist of any
combination of devices, subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed five. The modem REN is located on the rear of the
equipment on the product labeling.
Telephone companies report that electrical surges, typically lightning transients, are very destructive
to customer terminal equipment connected to AC power sources. This has been identified as a major
nationwide problem. It is recommended that the customer install an AC surge arrestor in the AC
outlet to which this device is connected. This is to avoid damage to the equipment caused by local
lightning strikes and other electrical surges.
This equipment uses CA11A telephone jacks.
Declaration of conformity (European countries)
EC Certification
Certification to 1999/5/EC Radio & Telecommunications Terminal Equipment Directive (FAX)
This product has been self-certified for pan-European single terminal connection to the analogue
Public Switched Telephone Network (PSTN) in accordance with Directive 1999/5/EC. The product
has been designed to work with the national PSTNs and compatible PBXs of the European
countries:
In the event of problems, you should contact Lexmark International Inc. in the first instance.
The product has been tested against TBR21. To assist in the use and application of terminal
equipment which complies with this standard, the European Telecommunication Standards Institute
(ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed
against, and is fully compliant with, all of the relevant advisory notes contained in this document.
Using the Lexmark X215 in Germany
The Lexmark X215 requires a German billing tone filter (Lexmark part number 14B5123) to be
installed on any line which receives metering pulses in Germany. Metering pulses may or may not be
present on analog lines in Germany. The subscriber may request that metering pulses be placed on
Telecommunications notices
95