Table of Contents
Advertisement
4069-XXX
Status
Bytes 1, 2,3
84 xx 1F
84 xx 21
84 xx 22
8E xx 02
8E xx 0B
8E xx 11
Envelope Feeder Sub Error Codes
Status byte 1 contains the most valuable information to help isolate a
feed problem with the envelope feeder and is the only byte contained
in the following table.
Status
Explanation
Byte 1
00
There was no envelope feeder error reported.
10
Printer failed POST - Homing of Envelope feeder
11
Printer failed POST - Halted Envelope Feeder
21
The envelope feeder failed to feed, envelope jam.
30
The D.C. motor failed to reach operating speed.
32
The motor stalled.
36
The motor failed to stop.
2-10
Service Manual
Explanation
The paper fed too early from Tray 1.
The smart option did not pick the paper.
The smart option did not pick the paper.
The input sensor is not activated even though the paper is
picked from the source.
The autocompensator DC motor stalls when attempting to
pick a sheet of paper.
The autocompensator DC motor takes too long to ramp up.
Advertisement
Table of Contents
