Lexmark OPTRA 4069-XXX User Manual page 114

4069-XXX
Paper does not feed into the bin selected. 271 Paper Jam - Check
Bin 1 displays
FRU
1 Deflector
Deflector Spring
Deflector Cover
Deflector Cover Spring
Shaft assemblies
2 Bin X Solenoid Assembly
Control Board
3 Mechanical Linkage
Motor Assembly
2-86
Service Manual
Action
Check all the bin parts for signs of
missing or loose springs, binds in the
deflector or deflector cover, broken or
binding shaft assemblies or broken
gear teeth. If incorrect, repair as
necessary.
Check the solenoid for any binds.
Make sure the solenoid is contacting
the latch correctly. If incorrect, repair
as necessary. If the solenoid appears
to be operating mechanically, check
the resistance of the solenoid. It
measures between 30 and 50 ohms. If
incorrect, replace the failing solenoid
assembly. If correct, replace the
control board.
If the DC motor is functioning properly,
check the gears, clutch and other
linkage parts for correct operation and
any signs of wear, broken gear teeth
or damaged parts. If incorrect, replace
the mechanical linkage assembly/DC
motor assembly.