Lexmark OPTRA 4069-XXX User Manual page 131

4069-XXX
Print Quality - Light Print
Service Tip: Check the toner saver and print darkness settings first if
the print is light.
FRU
1 Transfer Roll
2 Right Side Transfer Roll
Arm Assembly
Action
Check the right end of the transfer
roll shaft for signs of wear or
contamination. If incorrect, replace
the transfer roll.
Check the right side transfer roll arm
assembly bearing for any signs of
wear or contamination. Also check to
ensure the transfer cable is firmly
attached to the bearing. If incorrect,
replace the right side transfer arm
assembly. Check the connection of
the transfer roll assembly cable to
the transformer on the HVPS board.
Check the continuity of the cable
from the bearing to the spade
terminal on the cable. If incorrect,
replace the right side transfer arm
assembly. If correct, replace the
HVPS.
Diagnostic Information
2-103